TST Programmable Sequential LED Integrated Tail Light Yamaha FZ-09 / MT-09 2017-2020

Upgrade your 2017-2020 Yamaha FZ-09 / MT-09 with the Programmable and Sequential TST Industries LED Integrated Tail Light. Our exclusive design features a unique lens, bright LEDs, and multiple programmable and sequential states. With plug & play wiring, cleaning up the tail of your Yamaha hyper-naked sportbike couldn't be easier.

Applications:

Yamaha FZ-09 / MT-09 | 2017, 2018, 2019, 2020

Please note that an LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. Only one LED flasher relay is required per motorcycle. Both sold separately.

Features:

• Unique and aggressive design that compliments the FZ-09 / MT-09 styling
• LED perimeter running light
• Super bright LED design
• Available in smoked or clear
• Built in turn signals
• Programmable Functions
  • Modify the functionality of your turn signals and brake light
  • 3 turn signal modes: standard, sequential, pulsar
  • 3 brake light modes: standard, strobe alert, pulsar
• Contains 78 super bright LEDs that demand attention
  • 40 running / brake LEDs at 80% brightness during running light mode and switch to 100% brightness for brake mode
  • 6 dedicated brake LEDs combine with the 40 mentioned above to fill in previously unlit areas for maximum brightness
  • 32 signal LEDs
• Easy plug-and-play installation - no wire cutting, splicing, or soldering required
• TST Exclusive Design

The TST Integrated Tail Light for the 2014-2016 FZ-09 / MT-09 has already proven to be very popular with FZ-09 riders, providing a unique and clean look that drastically improves the tail section. That hasn't changed with the 2017-2020 model. The TST team worked hard to design a unique integrated tail light that matches the design language of the bike itself, bringing the styling all the way to the tail light. The bright LED turn signals and perimeter running light design set this FZ09 / MT09 tail light apart from the rest and enable you to ditch all of the OEM bulk that comes on your new Yamaha.

FLASH RATE: An LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. If you don't already have an LED Flasher Relay installed on your bike and you want to avoid the hassle of wiring in load balancing resistors, check out our plug-and-play TST Gen2 LED Flasher Relay and ensure your new LED lighting works properly.

Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information. Featured Images