TST LED Integrated Tail Light Kawasaki Ninja 300 2013-2017 / Z300 2015-

Upgrade your Kawasaki Ninja 300 / Z300 by integrating the turn signal functions into the tail light for a sleek and race inspired look. With different light modes to choose from and your choice of clear or smoked lens, you can program your new tail light to fit your style.

Applications:

Kawasaki Ninja 300 | 2013, 2014, 2015, 2016, 2017
Kawasaki Z300 | 2015, 2016, 2017

Please note that an LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. Only one LED flasher relay is required per motorcycle. Both sold separately.

Features:

• Smoked or clear lens
• Programmable light modes featuring strobe brake and sequential turn signals
• Built in signals
• Plug and play - no wire cutting or splicing required
• 88 super bright LEDs

Want that sexy racing look for your Kawasaki? You simply cannot get a cleaner look under your tail! Other tail lights on the market have their light output confined to approx 75% of the lens width. We designed our circuit so the LEDs span the entire width of the lens, and provide an even output across the entire lens. The hexagonal dome optical diffuser elements built into the inner surface of the lens make the light look more full across the whole tail light by taking the light from the individual LEDs and spreading it around. On our smoked lens version we use black circuit boards which enables us to use a minimally tinted lens to get the same smoked look as our competitors, but without sacrificing the light output. Both the lens and the fixture elements have our logo molded into them so you know you are getting a genuine TST Industries product! Our programmable tail light features easy to change light modes that enable any combination of the following modes: standard signal, standard brake, sequential signal, strobe brake.

NON U.S. BUYERS: If you are purchasing an LED flasher relay, please verify the pin configuration before purchasing. North American models models require a two pin flasher relay, but some international models require a four pin flasher relay. It is your responsibility to verify fitment of these items before making your purchase.

FLASH RATE: An LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. If you don't already have an LED Flasher Relay installed on your bike and you want to avoid the hassle of wiring in load balancing resistors, check out our plug-and-play TST Gen2-F LED Flasher Relay and ensure your new LED lighting works properly.

Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.