OptiMate 4 Dual Program Motorcycle Battery Chargers

The Optimate 4 features a weatherproof enclosure with built-in wall mounts, improved energy efficiency and cables good down to -40 degrees, the OptiMate 4 DUAL PROGRAM is ideally suited to all powersport vehicles especially those used on water and in the cold. Recommended for STD, sealed AGM  & sealed GEL 12V lead-acid batteries up to 50Ah. A fully automatic operation that includes all safety features such as reverse polarity protection, no spark connection and is approved to UL & CSA safety standards for automatic battery chargers.

• Program 1 (default setting on this model) desulfates, charges, tests and maintains the battery
• Program 2 - allows safe and unsupervised charging through a BMW motorcycle’s CANbus controlled 12V socket
• 10 second test at connection indicates your battery condition, a quick and easy ‘ride meter’ that will determine if you are ready to go or will have to charge the battery first
• OptiMate 4’s proven multi stage desulfation program saves neglected batteries (as low as 0.5V) other chargers can't
• Multi step program, that includes a unique cell voltage balancing step, guarantees the fastest and most complete charge
• OptiMate 4 will maintain your battery safe and ready-to-go for months on end, with the extremely effective “charge and rest” maintenance program
• Hourly battery condition tests monitors the battery and the current drain by the vehicle circuitry; a problem is indicated on an easy to understand light display
• 10 second test at connection for a more hands on diagnosis of battery condition

Specifications:

• Safe for 12V lead-acid batteries AGM/MF, Standard, & GEL batteries
• 2Ah to 75Ah rated capacity
• Fully automatic program control microprocessor with 6 stages
• Reverse drain current less than 0.5mA
• Output current (bulk charge 0.8A)
• Automatic desulfation 2 stages (recovery and Turbo-recovery)
• Charge time limit 48 hours (maintenance time: unlimited)
• Maintain / test cycles 30 min/30 min (alternating hourly)
• Charge retention test 5 possible results from ‘good’ to ‘bad’
• Size 8 x 3 x 2 ½ inches (200 x 75 x 61 mm)
• Weight (packaging 2lbs (3 lbs) – 0.9kg (1.3kg)
• Wall mounting easy direct wall mounting
• Input cable length 6ft (2m)
• Output cable length 6ft (2m)
• Operation temperature range From -40°C&F to 40°C/104F