Vanasche Kickstand Bypass Dongle Husqvarna 701 / KTM 690 Duke / Enduro / SMC / 1090 / 1290 Super

SKU:
VAN-HUSQ-701-KSB
$89.00
Out Of Stock, Backorder Available 1-4 Weeks

KTM/Husqvarna has gone to great lengths to provide a side stand sensor that cannot be tampered with.  If this sensor is to fail (or you lose the magnet) while in the field you WILL be left stranded. This product defeats the sensor and has saved countless rides from ending early. Don't get stranded with out one.....

Please read the fitment descriptions carefully and then select the appropriate SKU above. If you are in doubt, check the parts fiche and find the factory sensor part number for your motorcycle or just send us an email.  

Fitment: REPLACES KTM PART NUMBER: 60411045000

  • US Model 2017-2023 Husqvarna 701 - Enduro & Supermoto & Vitpilen
  • EU Model 2017-2020 Husqvarna 701 - Enduro & Supermoto & Vitpilen
  • US Model 2019-2023 KTM 690 - Enduro & SMC
  • EU Model 2019-2020 KTM 690 - Enduro & SMC
  • US Model GasGas 700 - Enduro & Supermoto
  • All Models 2016-2019 KTM 690 Duke
  • All Models KTM 1090 - All years
  • KTM 1290 Super Adventure - 2015-2020
  • KTM 1290 Duke - 2017-2019

For other model years, see this listing here.

These dongles replace the factory sensor. You can locate your sidestand sensor behind the sidestand pivot point. Trace the wire from sensor upward until you get to the connector (typically located around throttle body area). With ignition off, unplug the sensor and plug in the correct dongle. 

WARNING: This product is to be carried as a spare part and used to get you and your bike to safety when the OEM sensor fails. It is not to be installed while your OEM side stand sensor is operating normally as this allows the bike to engage gears with the side stand still in the down position which can result in property damage and/or injury. By purchasing this product you agree to assume full liability. 

More Information
Brand Vanasche Motorsports
Fitment Bike Specific
Product Fuses / Relays / Harnesses
Description

KTM/Husqvarna has gone to great lengths to provide a side stand sensor that cannot be tampered with.  If this sensor is to fail (or you lose the magnet) while in the field you WILL be left stranded. This product defeats the sensor and has saved countless rides from ending early. Don't get stranded with out one.....

Please read the fitment descriptions carefully and then select the appropriate SKU above. If you are in doubt, check the parts fiche and find the factory sensor part number for your motorcycle or just send us an email.  

Fitment: REPLACES KTM PART NUMBER: 60411045000

  • US Model 2017-2023 Husqvarna 701 - Enduro & Supermoto & Vitpilen
  • EU Model 2017-2020 Husqvarna 701 - Enduro & Supermoto & Vitpilen
  • US Model 2019-2023 KTM 690 - Enduro & SMC
  • EU Model 2019-2020 KTM 690 - Enduro & SMC
  • US Model GasGas 700 - Enduro & Supermoto
  • All Models 2016-2019 KTM 690 Duke
  • All Models KTM 1090 - All years
  • KTM 1290 Super Adventure - 2015-2020
  • KTM 1290 Duke - 2017-2019

For other model years, see this listing here.

These dongles replace the factory sensor. You can locate your sidestand sensor behind the sidestand pivot point. Trace the wire from sensor upward until you get to the connector (typically located around throttle body area). With ignition off, unplug the sensor and plug in the correct dongle. 

WARNING: This product is to be carried as a spare part and used to get you and your bike to safety when the OEM sensor fails. It is not to be installed while your OEM side stand sensor is operating normally as this allows the bike to engage gears with the side stand still in the down position which can result in property damage and/or injury. By purchasing this product you agree to assume full liability.