TST LED Front Flushmount Turn Signals Honda CBR250R / CBR300R / Grom / Select Models

These LED Front Flushmount Turn Signals fit most Honda sportbikes 1999 and later. Flushmount Turn Signals are sold as a pair (left and right sides). They are signal function ONLY, meaning they do not feature a running light unless paired with the TST Running Mate.

Features:

• 16 super bright LEDs
• Clear or smoked lens
• Optional harness converters for plug and play installation
• Signals ONLY - No running light unless paired with the TST Running Mate (sold separately)

These turn signals for Honda sportbikes fit the fairing/signal interface geometry and really clean up your sports machine. You can now ditch the OEM stalk signals and replace them with these sleek flush fit blinkers. The large plastic shoulder nut that attaches the flushmounts to the bike can be trimmed for custom fit applications. The wires of the signals terminate in bullet connectors.

RUNNING LIGHT: These turn signals are "signal-only" indicators, meaning that a running light function is not built-in. But, if you wish to retain your existing stock running light function, simply pair these signals with our TST Running Mate and appropriate 3-3 harness converters for a plug-and-play solution.

WHAT ARE HARNESS CONVERTERS? Harness converters alone do NOT enable a running light. The addition of the TST Running Mate is required for running light functionality. Harness converters are ONLY meant to enable a plug and play installation, meaning you don't have to cut, splice, strip, or solder any wires. OEM signals with a running light circuit use a three conductor plug, so for a setup of Flushmount Turn Signals that retain the running light, a TST Running Mate and 3-3 Harness Converter are required, or if you don't care to lose the stock running light, skip the Running Mate and use 3-2 harness converters. For OEM signals that do not have a running light, you will not have a running light and can use our 2-2 harness converters. if your bike does not have a running circuit and you wish to add one, check out our TST Running Mate and Circuit Connection Kit to find the parts you need to wire in a running light circuit and obtain DRL / running light functionality on your bike. FLASH RATE: Installing aftermarket LED lights may make your signals flash faster than OEM speed. Purchasing a flasher relay will correct this problem.

Harness Converters will NOT work for the F4i or the 2021+ CRF 300L RALLY

Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.