The instructions were not as detailed as I expected, however I was able to complete the install with only two hiccups.
1. The bolt that you remove from the left side, under the shifter, passes through the shifter support AND the kick stand assembly. This means that removing it while the kick stand is in use, will misalign the bolt path. Lift the bike and use a soft impact mallet to realign the path before pushing the bolt through for the final installation.
2. I had to remove the washer that went with the above mentioned bolt before it prevented my shifter from completing the downshift. The outside diameter of the washer was slightly too big and I didn't have any other washers that fit the bolt.
Otherwise, it looks like this cage will adequately protect my bike.