First, is there enough room for the ATLAS? All you need is a gap of 0.1" (2.5mm) or greater between the grip and the throttle housing. That's roughly 3 bank cards thick.
The Atlas Throttle Lock system is a useful and ingenious tool created to give a cruise control style function to any bike. These universal fitment pieces apply pressure to your throttle that prevents the throttle housing springs from rotating the throttle back to neutral, thus creating a cruise control type effect for any bike that may not have that functionality. Cruise control add-ons can be extremely expensive and not all bikes are new enough to support that type of upgrade, so the ATLAS Throttle Lock Motorcycle Cruise Control Kit can give you that power and comfort for a fraction of the price.
Please know that the kit does not actually "lock" your throttle, it only applies enough pressure to prevent the springs from rotating and can be easily overridden in emergency situations and can be controlled easily by rolling the throttle to increase/decrease speed or fully disengaging it.
Please see the helpful notes below on how to determine which kit is right for your bike!
You'll want the Bottom Kit…
• If there’s a heated grip wire that comes out the top half of the rubber grip flange.
• If you have more than 1.5 inches (38mm) of clearance between the inner plastic throttle tube (under the rubber grip) and the gas tank at a full right turn.
• If there's a bulge, bracket or object sticking out of the top half of the throttle housing that would interfere with the body of the ATLAS.
You'll want the Top Kit…
• If there’s a heated grip wire that comes out the bottom half of the rubber grip flange.
• If you have less than 1.5 inches (38mm) of clearance between the inner plastic throttle tube (under the rubber grip) and the gas tank at a full right turn.
• If there's a bulge, bracket or object sticking out of the bottom half of the throttle housing that would interfere with the body of the ATLAS.