OptiMate Cranking And Alternator Motorcycle Battery Tester

12V tester for battery state of charge, cranking performance and vehicle charging system. 

• For vehicles fitted with 12V AGM, GEL and STD lead-acid or 12.8V LFP / LiFePO4 starter battery.
• As easy as 1-2-3, connect to battery, check state of charge, start engine tester displays cranking voltage and vehicle charge voltage simultaneously – 15 sec is all you need!
• Display cranking volts down to 6V and charge voltage range up to 15V – Check weak battery or overcharging!
• Easy to use! Connect with the included clips to the battery or connect to an installed SAE battery lead.

Specs

• LENGTH: 40″/100cm
• CHARGE CONNECTOR (INPUT): 2-pin SAE (+set batteryclips)
• OPERATION:  fully automatic
• State of charge result in GREEN / RED LED resuls, indication of lowest start Volts when engine starts (20 sec) and running voltage from alternator & voltage regulator.
• CABLE RATING: SPT-2W 16 AWG (1.32mm2)
• FUSE: No fuse
• USE: -40°C/-40°F very low temperature, remains flexible at ‘below freezing’ temperatures
• STYLE: Fully enclosed electronic circuitry with multiple LEDs, SAE charge connector