How to Install Hepco & Becker Motorcycle Handlebar Protection Guards

How to Install Hepco & Becker Motorcycle Handlebar Protection Guards

Motorcycle handlebar guards stand as an often underestimated yet indispensable element in the realm of motorcycle safety and performance. 

 

These unassuming accessories serve a dual purpose, acting as a shield for both the rider and the motorcycle itself. One of the primary reasons to invest in handlebar guards lies in their ability to protect the rider during unforeseen accidents or spills. 

 

In the unfortunate event of a fall, handlebar guards serve as a first line of defense, preventing direct impact on the rider's hands and fingers. This not only minimizes the risk of injury but also enhances the overall safety of the riding experience.

 

Beyond personal safety, handlebar guards play a crucial role in safeguarding the motorcycle from potential damage. The handlebars, being one of the most exposed and vulnerable parts of a bike, are susceptible to impacts in almost every location - off road, while commuting, and even in crowded parking lots. 

 

By adding handlebar guards to your motorcycle, you have a protective barrier, preventing damage to essential components such as levers, switches, and grips (and, of course, your hands). This added layer of defense can contribute significantly to preserving the integrity of the bike, reducing repair costs, and ensuring a longer lifespan for the motorcycle (and, again, your hands).

 

But you already knew that. 

 

And that’s why you’re considering (or have already purchased) Hepco & Becker motorcycle handlebar guards

 

In this post, we'll cover:

 

 

What you’ve been waiting for: the instructions

 

Installing Hepco & Becker motorcycle handlebar guards typically involves a straightforward process, but the exact steps can vary based on the specific model of your motorcycle and the design of the handlebar guards. 

 

Below are general guidelines that should help you with the installation. Please refer to the specific instructions provided by Hepco & Becker for your particular model. And of course, don’t be afraid to ask for help if you run into trouble. 

 

Tools and materials needed to install handlebar guards 

 

Though we are talking about Hepco & Becker specifically, you’ll likely need some (or all) of these tools for most handlebar guard installations: 

  1. Hepco & Becker handlebar guards kit
  2. Allen wrenches
  3. Screwdriver
  4. Socket set
  5. Pliers
  6. Loctite (threadlocker) - optional
  7. Rubber mallet - optional

 

{Want more Moto content? Sign up for our newsletter for the latest updates, new products, sales, and much more}

As with the materials, these steps vary from bike to bike and between different products. But they’ll give you a general idea of what to expect. 

Installation Steps:

1. Prepare Your Workspace:

Ensure the motorcycle is on a stable surface, and the handlebars are accessible.

Lay out all the components from the Hepco & Becker kit.

 

2. Remove Existing Handguards (if applicable):

If your motorcycle already has handguards installed, you may need to remove them first. This usually involves loosening screws or bolts.

3. Install Mounting Brackets:

Identify the left and right mounting brackets provided in the kit. Attach the mounting brackets to the handlebars using the appropriate screws or clamps. Use the provided Allen wrenches to tighten them securely.

4. Attach the Guard Bar:

Once the mounting brackets are in place, attach the guard bars to the brackets using the provided hardware. Tighten all screws or bolts securely, ensuring that the guard bars are aligned properly.

5. Adjustment (if necessary):

Some handlebar guards allow for adjustment to suit the rider's preferences or to accommodate accessories. Follow the instructions to make any necessary adjustments.

 

6. Check for Clearance:

Rotate the handlebars to ensure that there is no interference between the guard bars and any other components on the motorcycle.

7. Test

Give the handlebar guards a gentle shake and ensure they are securely attached. Test the rotation of the handlebars to make sure there is no binding.

 

8. Final Check:

Double-check all connections and make sure the handlebar guards do not interfere with the operation of any controls.

9. Optional - Vibration Damping:

Some handlebar guards come with additional vibration damping components. Install these according to the provided instructions if applicable. You can also install motorcycle grip covers for an even smoother experience. 

how to install motorcycle handlebar guards

Always refer to the specific installation manual provided by Hepco & Becker for your motorcycle model, as there may be unique steps or considerations based on the design of your bike. If you are unsure or encounter difficulties, it's recommended to seek professional assistance or consult with a motorcycle mechanic.

 

Buy Hepco & Becker handlebar guards

If you were reading this article in preparation for purchase, we applaud you for your forethought. As you can see, handlebar guards are a great investment for your riding experience for a relatively low amount of effort. 

 

Do you have questions or need help choosing your handlebar guards? Contact us. We’ll be happy to provide our expert guidance on which product is right for your riding style. We’re also here if you have any questions about the installation (or, if you’re local to the DC area, feel free to stop by our storefront in Sterling, VA.)



Did you like this post? You may also enjoy: